Klarstein Ariana 10034431 Manual Del Usuario página 23

5. Place the inner chimney on the inner chimney holder. Mount the outer chimney
bracket to the outer chimney using two screws (4 x 8 mm). Drill holes in the wall to
fix the outer chimney bracket.
Note: Remember not to overtighten the screws (4 x 8 mm). We recommend that you
tighten them loosely so that the height can be easily adjusted later.
6. Drill 2 holes for the inner chimney holder. Fix the inner chimney mount to the wall
using the supplied screws (4 x 40 mm) and dowels.
Note: The inner chimney bracket is used to fasten the chimney. The following
illustration only serves as a reference. The chimney is attached to the wall plate at the
end of the installation.
Drill 2 holes for the outer chimney holder.
EN
23