Bestron AIRP200UV Manual Del Usuario página 24

OPERATION - General
The appliance is only intended for household purposes, not for professional use.
1. Air outlet
2. Air inlet
3. Housing
4. Soft touch control panel
5. UV-filter
6. 3-in-1 filter: Microfilter, Activated
Carbon filter, HEPA13 filter
7. Lid
OPERATION - Before first use
1. Carefully remove your air purifier from the box and plastic packaging.
2. Select a solid and flat surface that is level and place the air purifier there.
Note:
• For proper airflow, place the unit at least 12 inches away from a wall or furniture.
• Make sure no grids are blocked.
3. Before activating the unit, you must remove the filter from the device, remove the packaging and replace
the filter in the device.
4. Insert the plug into a socket with the correct voltage.
Attention: always take the appliance by the handle at the back when moving it.
OPERATION - Control panel
ON/OFF
Press button to turn on the product.
Press this button again to turn off the device.
UV-C LAMP
Press this button to turn on the UV-filter.
Press this button again to turn off the UV-filter.
FAN
Use this button to control the fan speed:
Press once = The fan blows at the lowest setting I. The indicator light comes on.
Press twice = The fan blows at the middle setting II. The indicator light comes on.
Press 3 times = The fan blows at the highest setting III. The indicator light comes on.
Press 4 times = The fan returns to the lowest setting. The indicator light comes on.
1
1 4
2
3
2
24
6
5 7
EN