Steren HER-245 Manual De Instrucciones página 2

Instruction manual
40 W hot glue gun
IMPORTANT
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site www.steren.com to obtain the latest version of the instruction manual.
CAUTIONS
• Evite tocar directamente la punta de la pistola, ya que alcanza temperaturas muy altas y existe
• Avoid directly touching the tip of the gun, as it reaches high temperatures and there is a risk of
burns.
• Do not leave it connected for a long time.
• Do not use or store the device in places where there dripping or splashing.
• Keep the tip of the gun away from any flammable or temperature sensitive objects.
• Do not use near substances (gas or liquid) flammables.
• If the cord is damaged, contact a dealer for replacement.
• This product is not a toy; Keep out of children reach.
• This appliance is not intended for use by persons with disabilities, unless they have the proper
training and supervision.
PARTS
1. Tip
2. Support
1
3. Trigger
4. Silicon bar entrance
5. LED indicator
INSTRUCTIONS
NOTE: Warm gun 5 minutes before use
1
Connect the silicon gun
in to an electric outlet
HER-245
V2.0/0717A
4
5
2
3
Product: 40 W hot glue gun
Number Part: HER-245
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
of delivery _______________________________________
2
4
Wait approximately 2-3 minutes, until heated through.
Before applying silicon, clean the
surfaces that you wish to glue
5
6
NOTE: Disconnect the gun if the silicone comes out watery, let stand for 20 minutes.
7
Unplug the gun when finished using. Place it on the
support to prevent the hot tip to touch any surface
and wait until it cools to pack away.
SPECIFICATIONS
Input: 100 - 240 V~ 50/60 Hz 40 W
In case your product fails or have
questions, please contact your
nearest dealer.
If you are in
Mexico, please
call to our Call
Center.
01 800 500 9000
3
Press the trigger sometimes
until the silicon bar is fully
inserted.
Hold pressing for about 25
seconds.