Descargar Imprimir esta página

Mitsubishi Electric MSZ-FH25VE2 Manual De Instrucciones página 5

Ocultar thumbs Ver también para MSZ-FH25VE2:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 54
P
REPARATION BEFORE OPERATION
Setting the installation position
Be sure to set the remote controller in accordance with the installed position of
the indoor unit.
Installation position:
Left:
Distance to objects (wall, cabinet, etc.) is less than 50 cm to the left
Center: Distance to objects (wall, cabinet, etc.) is more than 50 cm to the left
and right
Right:
Distance to objects (wall, cabinet, etc.) is less than 50 cm to the right
(Left)
(Center)
(Right)
Area
Left
Remote controller
display
Center
Right
1
Hold down
on the remote controller for 2 sec-
onds to enter the position setting mode.
2
Select the target installation position by pressing
(Each press of the
order:)
(Center)
3
Press
to complete the position setting.
Note:
The installation position can be set only when all the following conditions are met:
• The remote controller is powered off.
• Weekly timer is not set.
• Weekly timer is not being edited.
displays the positions in
(Right)
(Left)
En-4
.

Publicidad

loading

Este manual también es adecuado para:

Msz-fh35ve2Msz-fh50ve2