Garland CHOPPER 607 VE Manual De Instrucciones página 31

Do not abuse the cord. Do not use the cable to carry,
lift, or unplug the machine. Keep the cable away from
heat, oil, sharp edges or parts in movement. Damaged
or entangled cords increase the risk of electric shock.
Never use the machine with damaged cord or plug.
Before connecting the machine, check the plug and
cable for damage. If you discover any damage, send
your machine to a Service Center for repair. If the cord
is damaged or broken, unplug immediately. Damaged
or entangled cords increase the risk of electric shock.
The replacement of the plug or the power cord should
always be done by the manufacturer or its technical
assistance service.
Do not open the motor terminal box. If necessary, it
must be performed by a qualified electrician.
Never use a damaged connection, which does
not comply with the rules or requirements for this
machine.
When using an extension cord be sure to have a
minimum cross section of 2.5 mm
15 m, always fully unwound and that is suitable for
outdoor use. The use of an extension of cord suitable
for outdoor use reduces the risk of electric shock.
Position the extension cord so that it does not get
caught in branches or obstacles and so it is not in the
work area.
Always keep the cord away from the cutting tool.
Do not use this machine if the switch does not change
between "open" and "closed". Any electric
machine that cannot be controlled with the switch is
dangerous and must be repaired.
Always unplug the machine before performing any
work on this machine. Only handle this machine when
it is disconnected.
2.5. USE AND CARE OF THE MACHINE
Use only machine accessories, tooling, etc. in
accordance with these instructions and as intended,
taking into account the working conditions and the
work to be developed. The use of this mower for uses
other than the designated operations may result in
dangerous situations.
Check that all the safety devices are installed and in
good condition.
Remember that the machine operator is responsible
for the dangers and accidents caused to other people
or things. The manufacturer will not be in any way
liable for damages caused by improper or incorrect
use of this machine.
Keep your body away from the cutting tool while using
the machine.
2 , no more than Do not force this machine. Use this machine to the
correct application. Using the machine for the type of
work meant to be done will allow you to work better
and more safely.
Never attempt to cut logs larger than those indicated
in this manual this could be dangerous for the
operator, machine and others.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Keep this machine maintained and in proper condition.
Check that the moving parts are not misaligned
or locked, that there are no broken parts or other
31/120
English