Technical Information - Orliman actius ACWC01#40 Instrucciones De Uso Y Conservación

1. front and back in the middle and pull up. Tilt the wheel-
chair to the side and press both sides together to complete
the folding.
2. The rear wheels may be removed when necessary when
there is a lack of space by following the steps described in
section 5, "Instructions for use".
8.2. Assembly
If the rear wheels have been removed, you will have to put
them back on first. Please follow the instructions in section
5, "Instructions for use".
1. When you need to replace the rear wheels, please see sec-
tion 5, "Instructions for use".
2. Stand next to the wheelchair, tilt it a bit towards you and
push the seat tube down. The wheelchair will unfold. Stand
in front of the wheelchair and push again on the two seat
tubes to ensure that they are directly above the frame.
You can be sure your wheelchair is in the correct position
when the upholstery is flat.
�
Warnings:
Never sit in you wheelchair while being transported.
g Tip:
The backrest can be folded to lower the height of the wheel-
chair for transport.

9. TECHNICAL INFORMATION

MODEL ACWC01#40/43/46/49 ACWC02#40/43/46/49 ACWC03#40/43/46/49 ACWC04#40/43/46/49
Seat width 400/430/460/490 mm
Total height 900 mm
Total width(*) 580/610/640/670 mm
Total depth 910 mm
Seat-floor height 500 mm
Seat depth 410 mm
Backrest height 430 mm
Chair weight 15,60 kg
Chair weight 110 kg
(*) The dimensions to take into account when moving chairs through doors corresponds to the Total Width
400/430/460/490 mm 400/430/460/490 mm
900 mm 900 mm
600/630/660/690 mm 600/630/660/690 mm
1050 mm 1100 mm
500 mm 500 mm
410 mm 410 mm
430 mm 480 mm
17,80 kg 17,50 kg
110 kg 135 kg
400/430/460/490 mm
900 mm
580/610/640/670 mm
1100 mm
500 mm
410 mm
480 mm
16,00 kg
135 kg