OPERATION
Booster function control
Depending on the model, the cooking zones are paired vertically or crosswise.
Total power is shared within the paired cooking zones.
If you attempt to enable the Booster function for both cooking zones simul-
taneously, the maximum power available would be exceeded. In that case the
heat setting of the first activated cooking zone will be reduced to the highest
level available.
The child lock function
The Child Lock function protects the appliance from inadvertent operation by children. The
appliance can be operated once the child lock function has been released.
The Child Lock function can be set when the appliance turned on or off.
Turn Child Lock on/off
Touch and hold sensor (7) for 5 seconds to turn Child Lock on/off. Indicator light (9) is on
when the Child Lock function is on.
The Child Lock function remains set until it is released even after the appliance
has been switched off and then switched on again. Disconnecting the appliance
from electrical mains deactivates the Child Lock.
Residual heat indicator
Heat energy that remains accumulated in the cooking zone after cooking is called the re-
sidual heat. The appliance displays two different levels of residual heat. When a cooking
zone temperature is above 60°C and the cooking zone or the appliance is switched off, the
relevant cooking zone display will show the letter "H". Residual heat indication is displayed
as long as the cooking zone temperature exceeds 60°C. When a cooking zone temperature
is between 45°C and 60°C, the relevant cooking zone display will show the letter "h" indicat-
ing low residual heat. When a cooking zone temperature is below 45°C the residual heat
indication is turned off.
When residual heat indicator is
on, do not touch the cooking
zone as there is a risk of burns
and do not place on it any
items sensitive to heat!
During failure of power supply "H"
residual heat indicator is not dis-
played. However, cooking zones
may still be hot!
48