Included In Delivery; Device Description - Weller WXP 65 Manual De Uso

WXP 65
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
2.2 Intended use
Use the WXP 65 soldering iron exclusively for the purpose indicated
in the operating instructions of releasing, accommodating and
depositing electronic components under the conditions specified
herein. Intended use of the WXP 65 soldering iron also includes the
requirement that you
− adhere to these instructions,
− observe all other accompanying documents,
− comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.

3 Included in delivery

WXP 65 (packed)
− Soldering iron WXP 65,
− XNT A chisel tip Ø 1,6 mm
− Operating instructions of WXP 65
Also included in WXP 65 soldering set
− WDH 10 safety rest
− Sole plate connector
− Operating instructions of WDC 2

4 Device description

4.1 Soldering iron WXP 65
The WXP 65 soldering iron is characterised by very fast and precise
achievement of the soldering tip temperature. A highly powerful
65 W heater element provides excellent dynamic performance.
Thanks to its slim-line design and the extremely short distance from
the handle to the tip, this soldering iron can be used for general
purposes from precision soldering to high-temperature soldering.
The WXP 65 is equipped with a usage detector and can be
automatically switched to standby mode or switched off when not in
use. The operating status is indicated by the status indicator LED.
For directions for setting the standby temperature and the switching
times, please refer to the operating instructions of the WX supply
unit in use.
Note The WXP 65 soldering iron by Weller may only be operated
together with Weller WX supply units.
5-8
T0052921199:
T0052921199
T0054485199
T0052921299:
T0051512199
T0058703153