Connecting A Computer; Using Your Tv; Turning Your Tv On And Off - Insignia NS-LCD26-09 Guia Del Usuario

Insignia NS-LCD26-09 26" LCDTV
For HDMI—Plug one end of an HDMI cable
into the HDMI1 or HDMI2 (1) jack on the back
of your TV, then plug the other end into an
HDMI device.
2
ANTENNA / CABLE
3
DIGITAL / ANALOG
4
2 Turn on your TV.
3 Press INPUT repeatedly to select the
external signal source you want to watch.
4 Turn on external signal source.
5 Insert a disc or videotape into the external
signal source, then press PLAY.
1
PC IN
5
VGA AUDIO
AV IN
SPDIF
6
7
Pr Pb
www.insignia-products.com

Connecting a computer

You can connect a computer using the HDMI or
VGA jack on the back of your TV.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
"wake" your computer, press the POWER button
on your TV or remote control.
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
VGA cable
2 Plug an audio cable from your computer's
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press INPUT repeatedly to select the VGA
input source.
To connect a computer using HDMI:
• Plug an HDMI cable into the HDMI INPUT
jack on the back of your TV and into the
HDMI Out jack on the back of the computer.

Using your TV

Turning your TV on and off

To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press to turn on your TV. The power
indicator LED turns blue.
3 Press again to return your TV to standby.
The power indicator LED turns red.
PC IN
VGA AUDIO
Audio cable
7