Safety Information; Product Identification - Desa Comfort Grow CGFLB18 Manual De Uso E Instalación Del Propietario

SAFETY INFORMATION

2
PRODUCT INFORMATION
UNPACKING
INSTALLATION
SAFETY INFORMATION
1. Keep the area around the product clear and free from combus-
tible materials, gasoline, or other flammable vapors and liquids.
2. You must operate this log set with a fireplace screen in place.
Make sure fireplace screen is closed during burning.
3. Let log set cool off before servicing or repairing.
4. Do not cook anything with this product. This includes hot dogs,
marshmallows, hamburgers, or any other food. Grease from
food could flame up causing severe burns or ignite clothing.
5. Surfaces of this product can become extremely hot. Therefore,
children and pets should be carefully supervised when they
are in the area of this product. This log set should not be left
unattended while it is burning.
6. Do not operate this product around intoxicated people. They
could injure themselves or others when using this product.
7. Except in cases of emergency, do not extinguish fire with wa-
ter or other liquid or solid material. This may cause damage to
the logs.
8. Wax firelogs produce soot and creosote which may accumu-
late in the fireplace venting system, and may ignite if highly
heated. A qualified agency or certified chimney sweep should
examine and clean the venting system once every year.

PRODUCT IDENTIFICATION

Front Log
Grate
Top Logs
Ash Pan
Figure 1 - Product Identification
UNPACKING
1. Remove logs, grate, ash pan, and grate steps from carton.
2. Remove all protective packaging applied to logs and ash pan
for shipment.
3. Check all items for any shipping damage. If damaged, promptly
inform dealer.
For more information, visit www.desatech.com
For more information, visit www.desatech.com
Grate Steps
Back
Log
INSTALLATION
1. Slide the two rear log grate steps over the two outer horizontal
supports on the grate as shown in Figure 2.
2. Place grate assembly in center of fireplace floor.
3. Place the back log onto the grate steps (see Figure 3).
4. Place the front log on the grate and slide forward against the
front bars on the grate (see Figure 4).
5. Place the smaller top logs onto the bottom logs (see Figure 5).
Leave as much open space between logs as possible to mini-
mize flame impingement and sooting. Note: Logs may chip if
they are handled roughly or if hit together while being placed.
6. Slide ash pan underneath center of grate and logs (see Figure 6).
Grate Steps
Grate
Figure 2 - Installing Grate Steps
Front Log
Front Bars
on Grate
Figure 4 - Installing Front Log
Ash Pan
Figure 6 - Installing Ash Pan
Back Log
Grate
Assembly
Figure 3 - Installing Back Log
Top Logs
Figure 5 - Installing Top Logs
108649