Unpacking Instruction; Power Supply; Control Elements - Vonyx SBS50 Party Speaker Serie Manual De Instrucciones

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.

CONTROL ELEMENTS

1. LED Ball ON/OFF
Switch to ON / OFF / BEAT (Sound activated lighting effects).
2. Pairing to BT Devices
Press the button for some seconds and search for "SBSPARTY" on your BT device. Short press 1 second to turn off
BT and reconnect to the stored paired device. If asked for a pairing code, enter "0000".
3. Microphone Volume
This knob controls the level of the microphone.
4. Master Volume
This knob controls the master volume.
5. Power ON/OFF
Turn the power ON or OFF.
6. AUX Input
3.5mm Stereo jack can be used to connect a CD player, MP3 player, smartphones or other audio sources.
7. Microphone Input
6.35mm (1/4") jack input for microphone
8. USB Power transformer 5V
Insert the included USB power cord to power/charge the unit.
9. Echo Effect
This switch controls the echo effect of the microphone.
4