Using The First-Time Setup Wizard - HP LT4700 Guía De Usuario

Using the First-Time
Setup Wizard
Initial Setup
When you turn on the TV for the first time, a first-time
Setup Wizard guides you through the following tasks:
Setting the onscreen display language.
■
Setting the date, time, and time zone.
■
Selecting a signal source.
■
Searching the TV signal source (antenna or cable)
■
and memorizing the available TV channels.
You can start the Setup Wizard by using the Setup
menu in the Full Menu onscreen display; see "Starting
the Setup Wizard" on page 42.
Preparing
Complete the following steps before you press the
Power button on the remote control:
1
Insert the batteries into the remote control.
2
Connect the signal source antenna or cable to
the TV.
3
Plug in the AC power cord into the AC outlet.
4
Turn on the TV.
Setting the display language
1
Select from among three languages: English,
French, and Spanish.
2
Press the up and down arrow buttons on the
remote control to select the desired language, and
then press the OK button.
20
HP HDTV User's Guide
Setting date, time, and time zone
1
Press the up and down arrow buttons on the
remote control to highlight the date field.
2
Press the up and down arrow buttons on the
remote control to enter a year, month, and day.
3
Press the down arrow button to highlight the
time zone field.
4
Press the left and right arrow buttons to change the
time zone.
5
Press the down button to highlight the time field,
and press the number buttons to enter the time.
6
Press the left arrow button, and then press the
down arrow button to change between AM
and PM.
Setting the signal source
1
Press the up and down arrow buttons on the
remote control to select Antenna or Cable.
2
Press the OK button to start searching for channels.
This channel search operation automatically searches
for a signal from all available channels.
To view high-definition programming, you
must have a high-definition signal source,
such as an off-the-air high-definition
antenna or cable HD signal, a cable or
satellite provider HD set-top box, or a
HD-DVD player, connected to the TV. All
sources except a HD antenna or cable HD
signal, must connect to one of the High
Definition Input connector sets on the TV.