Battery Replacement - Tripp-Lite SmartOnline SU750XL Manual Del Usuario

Troubleshooting
Lights (On/Flashing) and Condition
On: FAULT
Flashing: LINE, 50%
Condition: No Output due to Low Output
Voltage and Abnormal Input
On: FAULT, 25%
Flashing: LINE
Condition: No Output due to High Bus
Voltage and Abnormal Input
On: FAULT
Flashing: LINE, 25%
Condition: No Output due to Low Bus
Voltage and Abnormal Input
Flashing: LINE, FAULT
Condition: No Output due to High Internal
Temperature and Abnormal Input

Battery Replacement

1
Your model may differ.
2
Your model may differ.
3
Your model may differ.
17-05-031-932470.indb 12
Battery Replacement Door: Under normal conditions, the original UPS
battery will last several years. Battery replacement should be performed
only by qualified service personnel. Refer to "Battery Warnings" in the
Safety section. Should your UPS require battery replacement, visit
www.tripplite.com/products/battery-finder/ to locate the specific
replacement battery for your UPS.
1
Carefully pull the front panel away from the UPS.
Place front panel on top of the unit. Remove the battery support bar.
2
Remove old batteries.
Carefully pull the batteries from the UPS and disconnect them.
3
Connect new batteries.
Connect the new batteries in exactly the same manner as the old ones:
positive (red) connectors together and negative (black) connectors
together. Carefully push batteries back into the UPS.
4
Reassemble UPS.
Reinstall the battery support bar and replace the front panel.
Solution
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Check the UPS to be sure that there is adequate
space for air to circulate near the vents and that
the fan is working properly. Restart the UPS. If
the problem persists, contact Tripp Lite for
repairs.
12
5/23/2017 1:52:19 PM