MAGLOGIX MX-220-L Manual De Instrucciones página 8

You can calculate the maximum load-bearing capacity of the Lifting Magnet, including the 3:1 safety factor, on the
basis of the load-figure that corresponds to the direction.
Example: You would like to lift a plate of A36 steel which is ¼" thick. The plate stands vertically in your shelf (i.e. at
an angle of 90°) and your Lifting Magnet is ideally positioned, as shown above in figure 1.
Material thickness:
Material:
Alignment of the load: 90° tilted; load swivel facing upwards
Maximum load weight with 3:1 safety factor = 220 Lbs. x 100 % x 30 % = 66 Lbs.
Load-figures corresponding to the direction for the MX-220-L
¼"  max. load-bearing capacity at 0° = 220 Lbs. (see Table 1)
A36  holding force, subject to material = 100 % (see Table 2)
Load-figure corresponding to direction = 30 %
8