After Cleaning - Laguna WG 250 Instrucciones

Bombas de agua para jardineria
Ocultar thumbs Ver también para WG 250:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Laguna Water Gardening Pumps 2000,
3000, 5000 and 7000: No tools are
required to remove the impeller.
Simply grasp impeller (C) firmly and
pull it out of the impeller well. (Fig. 3)
IMPELLER MAINTENANCE
WARNING: These motor units incorporate
a ceramic impeller shaft. This shaft will pro-
vide reliable, lasting performance. However
this shaft is brittle. Please take extreme care when cleaning. Replacement
shafts are available.
Thoroughly clean all parts to remove accumulated slime, dirt or debris.
DO NOT USE DETERGENTS OR OTHER CHEMICAL CLEANERS.

AFTER CLEANING:

Laguna Water Gardening Pumps 250, 500, 1000 and 1500: Put the
shaft assembly back in position and slide the impeller onto the shaft.
Replace Impeller Cover to "on" Position (for Water Gardening
Pumps 500, 1000 and 1500 only).
Laguna Water Gardening Pumps 2000, 3000, 5000 and 7000:
Insert Impeller, already on the shaft, into shaft receptacle. Ensure
that the top tip is inserted into the upper receptacle. (Place motor
cover back in position and secure with screws.)
Slide the pump into position on the base.
Replacement parts may be ordered from your local Laguna Dealer or
the closest service Division.
The power cord of this appliance cannot be replaced; if the cord is
damaged, the appliance should be discarded.
TROUBLESHOOTING
Low flow from Pump
• Ensure strainer (if any) is clean.
• Check input area for clogging or blockage
• Check hose for blockages
No flow from pump
• Check power supply is on.
• Disconnect the pump, remove the impeller assembly and clean,
then reconnect the pump.
8
C
Fig. 3
GUARANTEE
Laguna Water Gardening Pumps are unconditionally guaranteed
for defects in material or workmanship for a period of three years
from date of purchase. This guarantee is valid only under normal
operating conditions for which the Pumps are intended. This guar-
antee will not apply to any unit subjected to improper use, negli-
gence or tampering. This is limited to the Pump unit only.
The motor is factory sealed, tampering will void guarantee.
SERVICE
If you have a problem or question about the operation of this product,
please let us try to help you before you return the product to your deal-
er. Most problems can be handled promptly with a toll free phone call.
When you call (or write), please have all relevant information such as
model number and/or part numbers available, as well as the nature of the
problem. Call our Customer Service Department:
Canada Only: Toll Free Number 1-800-55HAGEN (1-800-554-2436)
Between 9:00 AM and 5:00 PM Eastern Time.
U.S. Only:
Toll Free Number 1-800-724-2436
Between 9:00 AM and 5:00 PM Eastern Time.
U.K. Only:
Helpline Number 01977 556622
Between 9:00 AM and 5:00 PM.
For Authorized Warranty Repair Service:
Return unit with dated receipt to:
Canada:
Rolf C. Hagen Inc.
3225 Sartelon St., Montreal, Quebec, H4R 1E8
U.S.
Rolf C. Hagen (USA) Corp.
P50 Hampden Road, Mansfield, MA. 02048-9107
U.K.
Rolf C. Hagen (UK) Ltd.
California Dr. Whitwood Ind. Est., Castleford, West
Yorkshire WF10-5QH
For general information on our whole product range, explore our
website at:
www.hagen.com
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wg 2000Wg 3000Wg 5000Wg 7000Wg 500Wg 1000 ... Mostrar todo

Tabla de contenido