Installation Procedure; Installation Of Control Console - Gaggenau VL 414 110 Instrucciones De Instalación

2 If the front panel is more than 1" (26 mm) thick:
mill out the rear of the front panel so that it is no
thicker than 1" (26 mm). Choose the dimensions
of the milled recess according to the control
panel.
For flush installation:

Installation Procedure

Installation of control console

Note: Only install the appliance in conjunction with
the corresponding control console.
1 Remove the packaging of the control knobs and
the protective film from the light rings.
2 Hold the bracket against the front panel from the
rear. Insert the control knob in the holes from the
front and screw it down it from the rear with the
nut.
11