Kensington KeyFolio Thin X2 Plus Guía Rápida página 8

Key
Mute
Volume up
Fn +
brightness
Lock
Fn + X = Cut
Fn + V = Paste
Fn +
* Toggles between available languages
Troubleshooting
I can't connect the Keyboard to my iPad.
Try the following in sequence. You can stop when the problem is fixed.
1 Make sure you have installed and set up Bluetooth correctly on your iPad. Check the
documentation that came with your iPad for instructions.
2 Make sure that the Keyboard is within range of your iPad. Maximum Bluetooth range
is about 10 meters/33 feet.
3 If your iPad is connected to other Bluetooth devices, you may need to disconnect
some devices before you can connect to the Keyboard.
4 If you changed any Bluetooth settings on your iPad, try connecting the Keyboard to
your iPad again.
5 Make sure that both your iPad battery and the Keyboard battery are sufficiently
charged.
If this does not solve the problem, please contact Kensington Support at kensington.com.
Technical Support
Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently Asked Questions (FAQ)
section of the Support area on the Kensington Website: www.support.kensington.com.
Telephone Support
There is no charge for technical support except long-distance charges where applicable.
Function
= increase backlight
= Select right word
Key
Volume down
Fn +
brightness
Fn +
turn off backlight
Display recently opened apps
Pair
Fn + C = Copy
Fn +
6
Function
= decrease backlight
again or twice =
= Select left word