dirna Bergstrom bycool green line COMPACT 3.0 SCANIA Instrucciones De Montaje página 17

COMPACT 3.0
Position the interior air distribution panel
12
on the front studs with (1) M6 wide-flanged
washer and (1) M6 nut on each stud. Tighten
the nuts until the duct comes into contact with
the upper foam in the unit.
Important: The rubber ductings should
come to a stop against the foam rubber in
order to prevent leakages of air.
Ø 6 flat washer
Original
edgeband
Cabin roof
Upholstery
Original screw
13 Tighten the nut in point 9 until it comes up
against the top part of the interior air distribution
panel.
14 Present console and centre Compact until
original screws coincide with their original
position.
Ø 20 x Ø 7 x 3 rubber washer
9
A
M6 nut
M6 nut
M6 stud
Console
Air conditioning for vehicles
12
Foam
Duct adjustment against the base foam
Rubber ductings
14
17
Diagram A
Interior air distribution panel
EN