Before The First Use - Domo DO9196WK Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
·
Always place the appliance on a flat, stable surface
·
Always pour out boiling water slowly and carefully, making sure that you do not tip the kettle too fast.
·
Be careful when you fill the water kettle when the appliance is still hot.
·
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
PARTS
1.
Lid
2.
Button to open the lid
3.
Handle
4.
Spout
5.
Water level indication
6.
Base
7.
Display
8.
Heat retention function
9.
Temperature setting
10. On/off button

BEFORE THE FIRST USE

Boil a full water kettle twice and pour away the water before actually using the water kettle for the first
time.
USE
1.
Place the water kettle on a flat and stable surface.
2.
Remove the water kettle from its base and open the lid by pressing the top button.
3.
Fill the water kettle with the desired amount of water. Make sure that the water level is always
higher than the minimum indication (0.5 l) and lower than the maximum indication (1,5 l).
·
If you have not added enough water, the water kettle will switch off before the water boils.
·
If you have added too much water, the boiling water could escape through the spout. That is
why you should never exceed the maximum indication when filling the kettle. Also, always make
sure that the lid is properly closed before turning on the watter kettle.
4.
Close the lid. Make sure that it is closed well.
5.
Place the water kettle on its base.
6.
Plug in the appliance.
7.
Press the on/off button. The water will boil till 100°C. Or select the desired temperature by pressing
the temperature setting button once or several times. The selected temperature will appear on
the display: 100, 90, 80, 70, 60, 50 or 100°C. The selected temperature will continue blinking on the
display. If the temperature is reached, you will hear a signal and the temperature will stop blinking.
8.
The water kettle will turn off automatically when the water boils. The selected temperature will be
visible on the display for 2 minutes. You can also interrupt the boiling process yourself by pressing
the on/off button.
20
DO9196WK
1
2
4
5
6
3
7
8
9
10

Publicidad

Tabla de contenido
loading

Tabla de contenido