Status / Setpoint Menu; Errors Table; Max Temperature Alarm (Only For Rack With Installed Option) - Pfannenberg ICPlus902 Instrucciones De Uso

English
4.2.
(SEt folder)
In main view, press the set key to access
the Status / Setpoint menu.
Press set key again to view the value of
selected parameter. To modify this value
Press the "up" and "down" keys. Press the
set key once you have entered the required
value.* Press the esc key to exit this display
and go back to the previous level.
*
N.B. pressing the set key will confirm the value entered;
Pressing the esc key will take you back to the previous
level without saving the value entered.

5. Errors table

Label Description
Water Temperature Probe
E1
Fault
Alarm for HIGH
AH1 Water Temperature Probe
temperature
6. Max Temperature Alarm (only for RACK with installed
option)
The regulator gets the temperature measure from the thermoregulation probe; the setpoint of Max temperature Alarm is
40°C for Rack units.

Status / Setpoint menu

Status menu
Reset
Automatic (after replacing/repairing of the
probe)
AUTO (after temperature drops)
70040-089_01-A.docx
folder "SEt" will appears
Stops
Comp. Fan
OFF OFF
-
Type of
Error
Pump
- Alarm
- - Warning
5