Palmer PEOD Overdrive Manual De Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1.
has a voltage selection switch, connect the equipment
to the power outlet only if the equipment values and
the mains power values match. If the included power
cord or power adapter does not fit in your wall outlet,
contact your electrician.
2.
Do not step on the power cord. Make certain that the
power cable does not become kinked, especially at the
mains outlet and/or power adapter and the equipment
connector.
3.
When connecting the equipment, make certain that the
power cord or power adapter is always freely accessible.
Always disconnect the equipment from the power supply
if the equipment is not in use or if you want to clean
the equipment. Always unplug the power cord and power
adapter from the power outlet at the plug or adapter
and not by pulling on the cord. Never touch the power
cord and power adapter with wet hands.
4. Whenever possible, avoid switching the equipment on
and off in quick succession because otherwise this can
shorten the useful life of the equipment.
5. IMPORTANT INFORMATION: Replace fuses only with fuses of
the same type and rating. If a fuse blows repeatedly,
please contact an authorised service centre.
6. To disconnect the equipment from the power mains completely,
unplug the power cord or power adapter from the power
outlet.
7.
If your device is equipped with a Volex power connector,
the mating Volex equipment connector must be unlocked
before it can be removed. However, this also means that
the equipment can slide and fall down if the power
cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful
when laying cables.
8.
Unplug the power cord and power adapter from the power
6

Publicidad

Tabla de contenido
loading

Tabla de contenido