THERMEx ARLES Instrucciones De Montaje página 48

48
THERMEX ARLES
7
Secure four plastic bushings in the holes.
10
Push the spacer against the wall so that the
hole between the hood and the wall is sealed.
NOTE: Ensure that the back cover of the
kitchen cabinet is secured by the bracket.
13
Replace the filters inside the hood.
INSTALLATION OF HOOD WITH EXTERNAL LOCATION OF THE MOTOR
The motor for this hood can be uninstalled and positioned away from the hood. The motor can be moved a maximum of seven meters away from the
hood. Installation of the motor positioned externally is done in the following way:
8
x4
Push the hood back up into the cabinet.
11
x4
Secure the bracket using four screws.
14
Place the exhaust pipe on the hood. Take
special care to ensure the none-return valve
can open and close freely.
NOTE: This does not apply if the hood is used
for recirculation.
M 513052068216062016
9
Install the hood with four screws in the
plastic bushings.
12
Lock the spacer securely to the hood using
two screws.
x4
x2