MAGLOGIX MagnaDrill MXD-2.0 Manual De Instrucciones página 5

Device Description
The magnetic core drilling machine MagnaDrill
mechanically switchable permanent magnet. For this purpose, the magnet lever must be pressed downwards and
the safety tab must latch into place correctly. The motor can be switched on and off using the large keys on the
operator panel. The LEDs on the motor operating panel and the machine clearly indicate the operating state of the
motor and the magnet's holding force. A self-adjusting dovetail guide which the motor is attached to can be
vertically adjusted using the star handle. The type plate and an attachment possibility for the Allen keys included
can be found on the back of the machine.
A) Drive motor
B) MT2 arbor
C) Slide and setting screws
for adjustment on the back
D) Magnetic base
E) Recess for safety belt
F) Mains cable
®
MXD 2.0 can be attached to ferromagnetic work pieces using a
G) Safety tab
H) Operating panel
I) Lever for magnet
J) Star handle
1 – Motor ON
2 – LED for motor control
3 – Motor OFF
4 – Magnetic lever ON
5 – LED for magnetic field sensor
6 – Magnetic lever OFF
5