NEO PROTON 6 HEX USB Manual De Usuario página 15

7. INFRARED (IR6) REMOTE CONTROL OPERATION
To control the PROTON 6 HEX USB with the infrared re-
mote control:
• Press the button MENU repeatedly until SET
• Using UP/DOWN button to select On or to ena-
ble or disable the infrared remote control. Press
ENTER to confirm.
NOTE - Make sure to point the controller directly at the re-
ceiver on the product.
Automatic Mode
Automatic Mode will enable you to run the automatic pro-
grams on the product.
To turn on Automatic Mode:
1. Press AUTO on the controller.
2. Press + or - to choose between different auto programs.
To adjust the speed of the automatic program:
1. Press SPEED on the controller.
2. Press %.
3. Press + or – to either increase or decrease the
speed of the program.
Sound Active Mode
Sound Active Mode will enable the product to respond to
the music. To turn on Sound Active mode:
1. Press SOUND on the controller.
To adjust sound sensitivity in Sound Active mode:
1. Press SENSITIVITY on the controller.
2. Press %.
3. Press + or – to either increase or decrease sound
sensitivity.
Manual Color Control
To choose a specific color with the controller:
1. Press MANUAL on the controller.
2. Press any number between 0-9 to choose your color.
To manually control the RGBAW percentage:
1. Press MANUAL on the controller.
2. Press R, G, B, A, W, or UV to choose your color.
3. Press + or – to increase or decrease the percentage
of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press STROBE on the controller.
2. Press + or – to increase or decrease the strobe rate.
3. Press STROBE again to turn off the strobe.
To change the switching effect of the program:
•
Press FADE/SNAP on the controller.
•
FADE will slowly switch the effect. Snap will rapidly
switch the effect.
To black out the lights:
•
Press BLACK OUT on the controller.
•
This will turn off alll the lights until the button is
pressed again.
•
NOTE - The controller will not respond to any inputs
when Black Out is activated. If the remote does not
respond when a button is pressed, try pressing
BLACK OUT. You may have inadvertently activated
BLACK OUT.
P. 15
PROTON 6 HEX USB
ENGLISH VERSION