Publicidad
Idiomas disponibles
Idiomas disponibles
Customizable Cubed Foam
Customizable cubed foam is a simple and effective way to protect and organize your sensitive items. If your case is equipped with cubed foam, follow the directions
below to fit and protect your items.
1
Place your items on top of the foam
leaving space between each item. The
multilayer design of the foam* allows the
layers of pre-scored foam to be tailored
individually to accommodate taller items
or to be used as separate levels to
protect a larger amount of smaller items.
2
To ensure optimum protection for your
equipment it is important to keep all of
your items within the pre-scored grid on
the foam. This allows for a cushion if
ever the case falls or is impacted.
*Customizable cubed foam is available for all our cases. However, multilayer cubed foam is only available for the 940 and 945.
6
3
Once you are satisfied with your layout
you can mark the perimeter of the
cutout with tooth picks. Once you have
indicated the perimeter you can remove
your items. Begin by carefully removing
the required foam squares as one piece
within the indicated outline. If some
foam cubes are removed by mistake
they can be reattached by using a spray
type adhesive. Removed foam blocks
can be reused if necessary or modified
to accommodate shallower items. A
utility knife can be used to modify the
foam cubes.
4
Once all the required foam is removed
place your items in their respective
compartments to verify fit. Your equipment
is now protected!
Publicidad
