Removing Clogs - Panasonic MC-UG773 Instrucciones De Operación

Body Hose
Tuyau
Manguera

Removing Clogs

The body hose located on the back of
the vacuum cleaner carries the dirt from
the nozzle up to the dust bag. If the
hose should become clogged:
➢ ➢ Unplug vacuum cleaner.
➢ ➢ Pull open suction inlet cover and
Cover
(Suction Inlet)
Couvercle
(entrée
d'aspiration)
Cubierta
➢ ➢ Disconnect body hose from wand
(Abertura de
aspiración)
Nozzle Hose
Tuyau de tête
d'aspiration
Manguera de
➢ ➢ Plug in vacuum cleaner and turn on.
Boquilla
➢ ➢ Stretch body hose in and out to
➢ ➢ If clog still exists, turn vacuum
Nozzle Hose
Tuyau
Manguera
➢ ➢ Remove lower plate. See: "Removing
Hose Inlet
➢ ➢ Inspect inlet of nozzle hose and clear
Entrée du tuyau
Conección de
manguera
- 36 -
check for clogging. Secure suction
inlet cover properly after checking.
holder and check hose ends.
remove clogs that may not be seen.
cleaner OFF and UNPLUG POWER
CORD.
and Installing Lower Plate"
any obstructions.