Using The Machine; Kitchen Scales - Clatronic HMS 3152 Instrucciones De Servicio

• Do not through the packaging away, but keep it together with
the inner packing and the warranty documents for the whole
life of the warranty.
• Place the appliance on smooth, level and stable work
surface.
• Do not insert the appliance plug without installing the
necessary attachments.
• In order to remove any contamination from the production
line please clean the mixing bowl (8) and other accessories
before initial use in a soapy water solution.
• Dry well all the parts after washing.
• You can also use the mixer (4) and the mixing bowl (8)
without the mixer stand (9).
Instructions for Use
Always choose a utensil and a speed according to the following
table:
Product/Type of Max.
Preparation Quantity
Heavy dough (e.g.
500 g
yeast dough)
Cake mixture, Dres-
750 g
sings, Desserts
Sponge mixture, wafer
750 g
mixture, Cream
• With heavy mixtures, do not operate the machine for more
than 2 minutes, and then allow it to cool down for a further
10 minutes.
• Depending on the consistency of the mixture it is necessary
to remove the mixture from the edge of the mixing bowl and
place it back on the kneading attachments. The device must
be turned off.
TURBO Switch (2)
In order to switch the device to the maximum speed for a short
time press the TURBO button.
CAUTION: Do not use this function for more than 1 minute!
WARNING:
• During operation no objects such as spoons, the dough
scraper or your hands should touch the rotating whisks or
dough hook!
• Danger of injury!
• Do not press the button (7) during operation.
Assembly
1. Please ensure that the speed switch (3) is turned to „0".
2. Place the mixer stand on a smooth and fl at surface or on the
weighing surface. The suction feet hold the mixer fi rmly in
place. Place the hand mixer (4) on the upper section of the
mixer stand (9). Please check that it is fi rmly installed; the
mixer must lock into place.
05-HMS 3152 new 33
Max
Ope-
Utensil Level
rating
Time
kneader
1 -3 2 min.
hook
beater 2 -5 3 min.
1 –5 3 min.
beater
or turbo 1 min.
3. In order to lift the upper section, press the button (7) and
fold the upper section towards the back. Assemble the
desired attachment (10, 11) by inserting the upper end into
the openings provided on the arm.
• The dough hook with the disc washer on the shaft can
only be inserted through the larger opening (12).
• The whisks can be inserted into any openings. Please
ensure that the attachment locks into place. Place the
mixing bowl in the recess.
4. Weigh the ingredients with the integrated kitchen scales.
Now fi ll in your ingredients.
5. Do not overfi ll the device; the maximum quantity of ingredi-
ents is 1 kg.
6. Lower the arm by means of the button (7).
Electrical Connection
• Unwind the mains lead completely.
• Insert the mains plug into a properly installed 230 V/50 Hz
safety power socket.

Using the Machine

1. Please ensure that the speed switch (3) is turned to „0".
2. Insert the kneading hook or whisk into the food to be mixed.
Set the desired speed with the speed switch (3). Begin at
a low speed (level 1-2) and then increase this if necessary.
Clean the edge now and then with a dough scraper.
3. After you have fi nished kneading / mixing, move the switch
(3) back to the „0" position as soon as the mixture or a ball
of dough has formed. Then remove the mains plug.
4. The inserted tool can be removed by pressing the eject
button (1).
5. Press the button (7) and raise the upper section.
6. When the dough is ready it can be released with a dough
scraper and removed from the mixing bowl.
7. Remove the mixing bowl. Press the
the mixer.
8. Clean the parts as described under „Cleaning".
Releasing the kneading hook / beater
In order to release the hook, press the EJECT button (1).
NOTE:
The hooks can only be removed if the speed switch (3) is in
the „0" position.

Kitchen Scales

Battery Compartment (on the back of the scales)
The battery in the battery compartment has been secured for
transport with a foil. This prolongs the life of the battery.
Please remove this foil to prepare the scales for initial use.
Inserting the batteries
The battery is a long-life lithium cell. If the letters "Low" appear
in the display this means that the batteries need replacing as
follows:
button (6) to take off
33
30.01.2008, 17:20:35 Uhr