Napa 6-754 Manual De Instrucciones página 2

FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY.
This Instruction Manual Contains Important
Safety Information.
READ THIS INSTRUCTION MANUAL
CAREFULLY AND UNDERSTAND ALL INFOR-
MATION BEFORE OPERATING THIS TOOL.
• Always operate, inspect and
maintain this tool in accordance
with American National Standards
Institute Safety Code of Portable
Air Tools (ANSI B186.1) and any
other applicable safety codes and
regulations.
• For safety, top performance and
maximum durability of parts,
operate this tool at 90 psig; 6.2 bar
max air pressure with 3/8" diameter
air supply hose.
• Always wear impact-resistant
eye and face protection when
operating or performing
maintenance on this tool. Always
wear hearing protection when
using this tool.
• High sound levels can cause
permanent hearing loss. Use
hearing protection as recommended
by your employer or OSHA
regulation.
• Keep the tool in efficient operating
condition.
• Operators and maintenance
personnel must be physically able
to handle the bulk, weight and
power of this tool.
• Air under pressure can cause severe
injury. Never direct air at yourself or
others. Always turn off the air
supply, drain hose of air pressure
and detach tool from air supply
before installing, removing or
adjusting any accessory on this
tool, or before performing any
maintenance on this tool. Failure to
do so could result in injury. Whip
hoses can cause serious injury.
Always check for damaged, frayed
or loose hoses and fittings, and
replace immediately. Do not use
quick detach couplings at tool. See
instructions for correct set-up.
• Air powered tools can vibrate in
use. Vibration, repetitive motions or
2 PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MANUAL FOR FUTURE REFERENCE.
WARNING!
!
• Use only mounted points with adequate speed rating.
• Do not lubricate tools with flammable or volatile
liquids such as kerosene, diesel or jet fuel.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace any damaged labels.
• Use accessories recommended by NAPA Professional
Air Tools.
uncomfortable positions over
extended periods of time may be
harmful to your hands and arms.
Discontinue use of tool if
discomfort, tingling feeling or
pain occurs. Seek medical advice
before resuming use.
• Place the tool on the work before
starting the tool. Do not point or
indulge in any horseplay with
this tool.
• Slipping, tripping and/or falling
while operating air tools can be a
major cause of serious injury or
death. Be aware of excess hose left
on the walking or work surface.
• Keep body working stance balanced
and firm. Do not overreach when
operating the tool.
• Anticipate and be alert for sudden
changes in motion during start up
and operation of any power tool.
• Do not carry tool by the hose.
Protect the hose from sharp objects
and heat.
• Tool shaft may continue to rotate
briefly after throttle is released.
Avoid direct contact with accessories
during and after use. Gloves will
reduce the risk of cuts or burns.
• Keep away from rotating end of
tool. Do not wear jewelry or loose
clothing. Secure long hair. Scalping
can occur if hair is not kept away
from tool and accessories. Choking
can occur if neckwear is not kept
away from tool and accessories.
• Never mount a grinding wheel or cut
off wheel on a die grinder. A grinding
wheel that bursts can cause very serious
injury or death.
Rev. 03/18/04