GRAPHITE PRO 59GP004 Manual Del Usuario página 24

Idiomas disponibles

DESCRIPTION OF USED GRAPHIC SIGNS

NOTE

WARNING

FITTING/SETTING

INFORMATION

EQUIPMENT AND ACCESSORIES

1. Grinding wheel guard

2. Additional handle

ATTACHING THE ADDITIONAL HANDLE

The additional handle (3) is installed in one of the holes in the grinder head. It is recommended to use the

grinder with the additional handle. When holding the grinder with both hands (also using the additional

handle), there is less risk of touching the grinder wheel or brush with your hand, as well as of injuries during

recoil.

ADJUSTABLE MAIN HANDLE

Before starting operation you can adjust the main handle to the position most comfortable for the task.

The handle can be fixed in 3 different positions by rotating it by 90º to the left or right in relation to the

base position.

● Press the main handle lock button (9).

● Rotate the main handle to a desired position.

● The main handle will automatically lock in the position.

INSTALLING AND ADJUSTING THE GRINDING WHEEL GUARD

The wheel guard protects the operator against flying broken pieces and accidental contact with a

working tool or sparks. The guard should always be fitted. Special attention should be paid so that

its covering part faces the operator.

The design of the wheel guard mounting allows for toolless setting of the guard in an optimum position.

• Loosen and pull back the lever (10) on the wheel guard (4).

• Rotate the wheel guard (4) in a selected position.

• Lock by lowering the lever (10).

The removal and adjustment of the wheel guard are performed in a reverse order to its installation.

REPLACEMENT OF WORKING TOOLS

When working tools are replaced, wear working gloves at all times.

The spindle lock button (1) is only designed to lock the grinder spindle, when a working tool is

installed or removed. Do not use it as a braking button, when the wheel rotates. Otherwise, the

grinder may become damaged or the user may be injured.

INSTALLING THE WHEELS

Disc installation does not require tools thanks to use of the quick release outer flange. Rim of the quick

release outer flange has special knurled texture for easier grip in hand.

Before disc installation make sure the inner flange (6) has a rubber O-ring installed and that the ring

is not damaged (fig. L).

● Press the spindle lock button (1) (fig. A).

- 1 pce

PREPARATION FOR WORK