ASSEMBLY INSTRUCTIONS
1. Remove eight M6 x 10 mm bolts (AA) from the fire
bowl (D). Place the fire bowl (D) upside down and
attach the legs (F) to the fire bowl (D) with eight
M6 x 10 mm bolts (AA).
Note: Hand-tighten bolts only.
Hardware Used
AA
M6 x 10 mm Bolt
2. Remove eight M6 x 10 mm bolts (AA) from the legs
(F). Attach leg support ring (E) to the legs (F) with
eight M6 x 10 mm bolts (AA).
Note: Hand-tighten bolts only until the leg support
ring is completely assembled, then tighten all bolts
from steps 1 and 2.
Hardware Used
AA
M6 x 10 mm Bolt
3. Remove M6 flange nut (CC) from M6 ring screw
(BB). Attach M6 ring screw (BB) to the top of the
screen (B), then secure with M6 flange nut (CC).
Hardware Used
BB
M6 Ring Screw
CC
M6 Flange Nut
1
x 8
2
x 8
3
x 1
x 1
Lowes.com/gardentreasures
4
F
AA
D
E
AA
F
BB
CC
B