Safety Instructions - Bürkle StopCock Instrucciones Para El Uso

English
General safety requirements
` ` Read these directions for use carefully before using.
` ` Keep these directions for use where they will be
accessible for all users.
` ` Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
` ` The instrument must only be used by qualified
skilled employees.

Safety instructions

` ` Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
` ` Damage to the respiratory tract and other organs
due to escaping or off-gassing media. Fill only in
ventilated rooms or under a suitable exhaust hood.
Wear appropriate protective clothing.
` ` The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
` ` The instrument is suitable for indoor use and
manual operation. Do not expose the device to any
direct sunlight.
` ` The instrument is not suitable for cleaning in a
dishwasher.
CAUTION!
Escaping liquids due to falling over or tipping of
the instrument. Bodily injury due to escaping liquid
and damage to the instrument.
` ` Make certain the container is positioned with
adequate stability.
` ` Do not transport with the stopcock screwed on.
Layout and function
` ` The device is made of PP, PE and PTFE.
` ` The device is suitable for dispensing non-crystal-
lizing liquids (without solids) from canisters and
barrels, or as a stop valve.
` ` The device can be used in the temperature range of
0 - 40 °C (briefly up to 75 °C).
` ` The device is pressure-resistant up to max. 2 bar at
20 °C.
Scope of delivery
1 x StopCock straight-through
1 x Transparent LDPE seal
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Assembly and safe usage
CAUTION!
Possible danger of breakage during operation.
` ` Apply only normal manual force.
` ` Do not lift the canister by the stopcock.
` ` Do not suspend filling containers from the
stopcock.
1. Insert the transparent LDPE seal  in the sealing
flange inside the union nut .
2. Screw the stop cock straight-trough with union nut
 onto the container thread or the corresponding
connection thread (G 3/4").
WARNING!
Danger of bodily injury due to liquid under high
pressure escaping.
` ` The pressure in the canister or tube must not
exceed 2 bar.
CAUTION!
Openings and spaces on the device. Danger of crushing.
` ` Be careful for spaces and openings when activa-
ting the plug.
3. Open the plug  (turn anti-clockwise) and dispense
liquid.
NOTE!
When filling, ensure sufficient adequate air ventilati-
on of the container.If necessary, open the canister
lid during the filling process or use a venting valve
in screw cap, e.g. for Bürkle compact jerrycans (see
accessories).
4. Close the plug (turn clockwise).
WARNING!
Bodily injury due to escaping liquid
` ` Close the stopcock completely after dispensing
(set plug to at least „zero").
` ` Keep the stopcock closed when it is not in use.
` ` Do not unscrew the stopcock from the container
or tube when it is filled.
` ` Empty the stopcock completely before disassembly.
