Blade Assembly - V-TAC VT-6053-5 Manual De Instrucciones

2.5. BLADE ASSEMBLY

Removed the 3 screws & the lamp
holder from the fixing panel.
NOTE: if installing more than 1 fan, be careful not to mix blades & screws as each model is
designed with specific materials & parts.
2.6. INSTALLING THE LED LIGHT AND GLASS SHADE
FIG 10
Do not over tighten the screws as this can damage the
blades. Repeat this process for all blades.
ENGLISH
Insert the blades
through the motor
housing's side slots
and align them with
the 3 holes.
Secure the blades
with 3 blade screws
& ensure that the 3
blade screws are
FIG 11
tightened properly.