Cleaning; Using The Specialneeds Or; Mini-Specialneeds Feeder - Medela Mini-SpecialNeeds Feeder Instrucciones De Uso

Cleaning

After each feeding: Flush cold water through the slit in the teat
to remove as much feed as possible. (Do not turn the teat
inside out or push brushes, etc. through the slit.) Take the
feeder apart, making sure that the valve membrane is separated
from the disc. Wash all the parts in warm soapy water. Rinse
thoroughly with cold water.
Each day: All disassembled parts of the feeder should be
sanitized by boiling, preferably in distilled water, for 20 minutes.
If hard water deposits occur use distilled water or occasionally
boil in a mixture of 3 parts water and 1 part vinegar. Parts can
be autoclaved to a maximum of 272˚F for 3 minutes at 29 PSIG
or 250˚F for 15 minutes at 15 PSIG. To avoid damage during
sterilization, sterilize parts without applying external pressure
on parts.
4
Using The SpecialNeeds
or Mini-SpecialNeeds
IMPORTANT
Consult your doctor before using the
SpecialNeeds or Mini-SpecialNeeds
Feeder for the first time, in order to
make sure that oral feeding is
recommended for your baby. Your
doctor should tell you
appropriate amount of weight your
baby should gain in a specified time
frame. If your baby does not gain this
amount of weight, contact your
doctor or other health care provider.
Always inspect parts thoroughly
before each use.
Components
Your SpecialNeeds or

Mini-SpecialNeeds Feeder

should include:
1-Container, 1-Teat, 1-Disc,
1- Valve membrane, 1-Collar.
Assembly
1. Press valve membrane onto the
upper side of the disc, so that the
stud goes completely through the
center hole.
™
™ Feeder
Collar
Mini-
SpecialNeeds
Teat
SpecialNeeds
Teat
the
Valve
Membrane
Disc
80ml
Container
(150ml Container available for
Special-Needs Feeder)
5