Tabla de contenido
Publicidad
STEP 7
1.
Slide back board (7) into grooves on left side panel (2), right side panel (3) and bottom
board (6).
2.
Attach top board to left side panel (2), right side panel (3), divider board (4) and back board (7)
by inserting cam bolts (A) into cam lock holes on left side panel (2), right side panel (3) and
divider board (4). Make sure back board (7) slides into groove on top board (1).
3.
Insert 6 cam locks (B) into cam lock holes on left side panel (2), right side panel (3) and
divider board (4), then rotate clockwise to secure cam bolts (A) in place.
STEP 8
1.
Insert 2 screws (I) into holes through back board (7), then tighten to divider board (4).
1
7
B
B
4
2
1
7
3
B
B
3
I
I
Publicidad
Tabla de contenido
