Rebel RB-5000 Manual Del Usuario página 31

Fixing and removing blower pipe and nozzle
To mount the nozzle and blower pipe follow the below instructions:
• Slide the blower pipe (3) on the air outlet so that is locks in place.
• Slide the nozzle (1) on the blower pipe (3) so that is locks in place.
To remove the blower pipe and nozzle follow the below instructions:
• Press and hold the nozzle release button (2) and at the same time firmly pull the nozzle.
• Press and hold the blower pipe release button (4) and at the same time firmly pull the pipe.
Switching the power tool on and off
• Slide the ON/OFF switch (5) forward to switch on the power tool.
• Slide the ON/OFF switch (5) backward to switch off the power tool.
MAINTENANCE
Before cleaning and maintenance, always switch off the power tool and remove the
battery.
Clean the casing regularly with a soft cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth
moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc.
Chemicals such as these will damage the synthetic components.
Clean the power tool before storing. Store the power tool, user manual and accessories
in the original packaging. Store the product in a clean, dry place protected from moist and
keep it out of the reach of children. Do not store the power tool in temperatures below 0°C.
Do not place or store any object on the top of the power tool.
Special condition for battery transport
The lithium-ion batteries contained in the power tool are subject to the dangerous goods
requirements. When preparing the tool to be shipped, it is mandatory to consult a specialist
in hazardous materials. Also observe any national/local regulations which is likely to be
more detailed. Tape terminals or mask them and pack the battery so that it does not move
in the package.
The product and the user manual are subject to change. Specifications can be changed
without further notice.
31 EN