Inserting The Battery - Estar X35 Guia Del Usuario

Inserting the Battery:

Your device is provided
with a lithium-ion battery
and is designed to be
used exclusively with
original batteries and
chargers. The battery
must be inserted into
the rear of the phone.
Insert the battery into
the battery compartment
with the contacts facing up corresponding to those of the
phone. When done, put the rear cover back into position
as shown in the following illustrations.
Charging the battery:
charge the battery before starting to use the device.
Connect the charger to a mains wall socket, and then
plug the jack into the charging base (wait for a moment
until an audio feedback notifies the charging start) or put
it directly into the micro USB port on the right side of the
phone. When charging has been completed/is complete,
a second audio feedback will be heard.
Attention:
To preserve the functionality of the product and the integrity
of the warranty, we recommend the use of original chargers.
Please charge the battery indoors, in a dry and favorable
environment. It's normal for the battery to get slightly warm
during the charging process. The battery will reach its full
capacity only after several complete charging cycles.
3