Suaoki U27 Manual Del Usuario página 7

·Low Battery Protection
When you are using the USB ports or flashlight, the power indicator lights
would display the remaining battery level. When only one power indicator
light blinks, the product has a low battery level and needs to be charged
immediately. If all power indicator lights go off when you are using the
product, the protection mechanism is triggered due to low battery level.
·Charging this Product
1. Plug the USB cable to any working USB-A power adapter.
2. Connect the USB connector to the Quick Charge input port of this
product.
Note:
1. Do NOT charge the jump starter immediately after using it to jump start a
vehicle or while it is still hot.
2. Do NOT connect with the smart battery clamp while the jump starter is
charging.
3. It is recommended not to exceed 10 hours of the charging time.
4. Do NOT charge the jump starter via a USB-A power adapter from
non-normalized manufacturers. Otherwise, the charging may be limited or
could not be fully charged.
·Jump Start a 12V Vehicle
Before jump start, please make sure the battery level of the jump starter is
over 50%, otherwise, you may not be able to jump start the vehicle.
1. Connect the battery clamp fully seated into the jump start socket. If the
green light and red light are flashing alternatively, this indicates that the
battery of the jump starter can work properly. If the battery cannot work
properly, the red light of the smart battery clamp will be on with buzzing.
EN-4