Fax +32 2 359 95 50
SPECIAL ATTENTION
Your new appliance is designed with a protective coating around the heating coils. When
plugged in and operating for the first time, there may be a little momentary smoking while this
coating is initially heated. This presents no danger to the user and does not indicate a defect in
the unit. When using for the first time, allow the appliance to continue running until the smoke
dissipates. This should last only about 30 seconds.
HOW TO USE YOUR STYLING DRYER
Speed settings
0 = OFF
1 = normal
2 = fast
To select the desired speed setting or to switch off the appliance, slide the switch along the
handle. Do the same to select the desired temperature. To select the cool shot function, put
the speed selector to the setting 1 or 2 and keep the cool shot button pressed.
WITHOUT CONCENTRATOR NOZZLE: If you want to dry your hair without styling it, make back and
forth or circular movements above the humid areas, but make sure you do not insist too long
on the same area in order not to get burned. You can use your hands or a comb to raise your
hair in order to dry equally everywhere. The choice of the speed setting depends on your
sensitivity and the thickness and length of your hair. If you want to style your hair afterwards, it is
advisable not to dry your hair totally.
You can also dry your hair as described above, but combing it at the same time to avoid tufts.
WITH CONCENTRATOR NOZZLE: The concentrator nozzle attaches easily onto the barrel of your
dryer and allows you to direct the airflow on a small section of hair at a time as you style and
shape the hair with a vent brush or comb. You can also build body and fullness into fine, thin
hair by directing the airflow against the natural growth of the hair.
WHILE USING: Untwist the cord from time to time to avoid tangling.
COOL SHOT FUNCTION: Use this function to make your hair more flexible and shape it as you
want. This function will strengthen the shape you gave to your hair when styling it.
CLEANING AND CARE: Unplug the appliance and let it cool down. Make sure the air inlet and
outlet grilles are free. To clean the grilles, use a vacuum cleaner or a sharp object to unblock
the holes. Make sure you do not insert the sharp object too far in the appliance, as it might
damage the appliance and even catch fire.
You can clean the housing of the appliance with a soft damp cloth. Make sure the appliance
is completely dry before using it again.
STORAGE: Unplug the appliance, allow it to cool, and store it in its box or in a dry place. Never
store it while it is hot or still plugged in. Never wrap the cord tightly around the appliance.
Never hang the unit by the cord - use the hanging ring provided. Disentangle the cord before
and after use.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Heat settings
I = medium
II = warm
III = hot
8
Assembly page 8/36
Cool shot button
IN = cool
OUT = hot
TKG HD 1001 - 120112