Videx 4000 Serie Guia De Inicio Rapido

4000 Series
Art. 4846
Information module
DESCRIPTION
The module comprises of a plastic bottom that houses the illumination LEDs with the relative PCB, a trans-
parent polycarbonate cover with a mirror finish stainless steel frame (standard finish) with a central window
(size 83x103mm) and a card (96.5x113.5mm) that can be customized to provide information to visitors (in-
structions, street number etc.).
The plastic bottom is attached to the polycarbonate cover locking the card as shown in Fig. 1. The cover has
the hinges for fixing to the module support.
These are complementary modules that can be used to fill free spaces on the outdoor station (for example
where 5 or 7 modules are required) or to keep one module space free (or more) for future expansion.
INFORMATION CARD
Please, to write the information card, refer to the size shown on Fig. 2. The card is 96.5x113.5mm but the visible area is 82x103mm:
to be readable, the information must be write inside this area.
Fig. 1
USING WITH ART. 4304X OR 4384X
When this module is used in combination
with Art. 4304X or Art. 4384X, you must
place an 1.5 K Ohm 1W resistance (pro-
vided) as shown in Fig. 3.
Art.4304
Art.4384X
Art.4846
Fig. 3
Art. 4846 - Installation instructions
ADHESIVE GASKET PLACEMENT
Apply the
Y
ANTI-TAMPERING LOCKS FIXING
Fit the anti-tampering locks
in Fig. 5.
Y
EXPANSION
BUTTONS
Fig. 4
Fig. 2
seal as shown in Fig. 4.
as shown
W
G
W
Fig. 5
- 1 -
CLEANING OF THE PLATE
Use a clean and soft cloth. Use moderate
warm water or non-aggressive cleansers.
Do not use:
• abrasive liquids;
• chlorine-based liquids;
• metal cleaning products.
POWER SUPPLY
– Black Wire
12Vdc power
supply
+ Red Wire
TECHNICAL SPECIFICATION
Power Supply:
Power Consumption:
Working Temperature:
66250060 - V4.1 - 15/06/21
12Vdc
30mA max
-20 +60° C