1. Operating methods:
The product has a total of 6 adjustable output shifts, including 3 common lighting modes, as well as 3 hidden flash modes used in special cases:
1 ) Common lighting mode (American ANSI/NEMA FL 1-2009 Standard)
Highlight ( with 270 lm output outside lens and 2.5 h use time)
Medium light ( with 130 lm output outside lens and 8 h use time)
Low light ( with 13 lm output outside lens and 100 h use time)
2) Hidden flash mode (American ANSI/NEMA FL 1-2009 Standard)
Self-defense Strobe
Location signal LB
International standard SOS
3) Normal turnon of flashlight
Press tail cap to turn on or off the flashlight; after turning off the flashlight, turn on it within 2 s, and then switch brightness to the
next shift. Turn it on or off repeatedly to realize cyclic shift switching. After turning on flashlight, gently press (half press) the tail
cap of the switch once each time, and then realize quick shift switching.
4) Method of switching to hidden flash mode
Turn on the flashlight, and quickly half press the switch for 3 times or above to enter the hidden mode, and then click the switch
for cyclic shift switching in flash mode.Turn off the flashlight in any shift for 6 s or above, and then turn on it again to restart to the
initial shift (highlight shift) output.
2.Performance parameters:
1 ) Illuminant: CREE® High-Power LED imported from America: CREE® XP-E2 series; color temperature: cool white
2) Rated input voltage: DC 3.0-6.0 V
3) Available battery: single 18650 lithium ion battery or double CR123A disposable lithium batteries
4) Range: 270 m (American ANSI/NEMA FL 1-2009 Standard)
5) Impact resistance level: Dropping resistance with the height of 1 m (American ANSI/NEMA FL 1-2009 Standard)
6) Level of resistance to dust and water: IP67, and water logging resistance with the water depth of 1 m (American ANSI/NEMA FL 1-2009 Standard)
3.Standard package:
Flashlight × 1: 90738
Battery × 1: 18650 rechargeable lithium ion battery, with capacity of 2,200 mAh
Charger × 1: single 18650 intelligent lithium ion battery charger
Hand strap × 1: high-quality hand strap preventing accidental release
4.Dimensions and weight:
1 ) Dimensions: length 136.5 mm; cylinder diameter: Ø 25.4 mm (standard 1" cylinder diameter) ; head cover diameter: Ø 32 mm (1.25")
2) Weight: 111 g ( including hand strap, excluding battery)
5.Precautions:
1 ) Charger: It is only used in indoor safe environment; please remove the battery after it is fully charged; please power off the charger
after charging; do not maintain and disassemble the charger by yourself.
2) Battery: The battery may not be fully charged during delivery. The user should fully charge the battery before using it for the fir time.
Please fully charge the battery at least every 6 months to maintain the performance of the battery. Only use the charger attached, and do
not use other chargers; otherwise, it will damage the product and endanger personal safety. Do not charge in a heating source or corrosive
environment; otherwise, it may cause a short circuit to damage the product and endanger personal safety.
3) Flashlight: It shall be kept away from the heating source. It shall not be used in the environment with corrosive gas, corrosive liquid
and high dust.The operating temperature and its limit are respectively recommended to be from 0° C to 20° C and from -10° C to
40°C. The high temperature environment exceeding the limit will reduce the service life, damage the product and endanger personal
safety.
90738
中文
EN
DE
RU
KO
(with 10 h use time)
(with 34 h use time)
(with 20 h use time)
PT
JA
ES