FIGURE 2
A
15
Step 2:
Place the decorative plastic cover (#15) onto the
chair's base assembly (#2) as illustrated above.
See Figure 2.
FIGURE 4
V-3
15
A
15
2
11
10
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
2
Step 3:
Insert the seat post (#3) into the hole in the center
of the base assembly (#2). Fasten them together
by using bolt (#5) and washer (#7). Make sure that
all of the bolts have been tightened completely.
See Figure 3.
Note:
For ease with installation, we recommend that the
seat post (#3) be slightly oiled or waxed before
fastening to the base assembly (#2).
Step 4:
Place cushions (#10 and #11) onto the swivel
chair. Secure the cushions to the swivel chair by
using the velcro straps. See Figure 4.
Caution:
This is a bar chair with swivel ability. Therefore,
keep young children off of it without adult
supervision. Watch your step when getting on
and off of this chair. When sitting on this chair, do
not lean forwards or backwards in order to avoid
tipping and falling off.
PAGE 2 OF 3
2
7
5
35
#5 BOLT M6*35