Publicidad
Idiomas disponibles
Idiomas disponibles
Note: There is a faster way to change the camera you are viewing. Directly press
cycle through paired cameras: CAM1 / CAM2 / CAM3 / CAM4 / SCAN MODE.
5.2.4. SCAN MODE
This function automatically cycles through your paired camera channels to display each camera
for 12 seconds. This function can be used only when you have more than 1 camera unit paired.
To enter in this mode:
1. Press the Menu/Back
2. Press the UP
key to enter into the sub-menu;
3. Press UP
or DOWN
into the sub-menu;
4. Press RIGHT
/LEFT
5. Press
key.
Note: When one of the cameras is out of range or is not switch on, the monitor will warn you and
the Scan Mode will stop.
Note 1: Scan mode can be activated/deactivated by pressing
screen.
5.2.5. DUAL MODE
The function will display two cameras on the screen at the same time. It only can be used when
there is more than 1 camera unit paired.
1. Press the Menu/Back
2. Press the UP
key to enter into the sub-menu;
3. Press UP
or DOWN
into the sub-menu;
4. Press RIGHT
/LEFT
5. Press
key go to dual mode.
Note: At the dual view mode, you won't be able to use the bidirectional function and you will hear
only the camera you have selected.
Note 2: A red frame will appear on the image selected. To see the image of one of the two
cameras full-screen, select with the RIGHT
press
key.
Note 3: If you have more than 2 cameras paired to the same monitor, press RIGHT
to select which ones you want to see.
5.2.6. ADD CAMERA AND PAIRING
The pairing between the monitor and the camera will be done under two circumstances:
- If you want to add an additional camera.
This product is designed to allow the observation of different areas with up to 4 cameras.
- If the monitor and the camera are not paired.
The monitor and the original camera leave the factory with channel 1 programmed, nonetheless,
key and the menu will pop up;
or DOWN
key until the camera icon
key to select VIEW camera icon
/UP
/DOWN
key and the menu will pop up;
key or DOWN
key until the camera icon
key to select VIEW camera icon
/UP
/DOWN
is highlighted then press RIGHT
key to select the scan camera icon
is highlighted then press RIGHT
key to select the dual view icon
and LEFT
key which one you want to see and
15
ENGLISH
then press RIGHT
while visualizing the main
then press RIGHT
;
key to
key enter
;
key enter
or LEFT
Publicidad
