Cameo ZENIT W600 D SMD Manual De Usuario página 21

SYSTEM INFORMATION (SYSTEM INFO)
Press MODE to access the main menu (--- Menu ---). Using the arrow keys, select the menu item
System Info (observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display
the corresponding information.
System Info
Firmware = Displays device
firmware
Temperature = Displays tem-
perature of LED
unit
Operation = Displays operat-
Hours ing time
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the spotlight from accidental and unauthorised
operation (see "Settings" - "Auto-lock"), the controls can also be locked manually. Press and hold
the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made to
change settings, "Locked!" will appear in the display, and changing the spotlight's settings via
the controls is no longer possible. After approx. 1 minute, the current operating mode is displayed
again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately 5
seconds. The display will show the previously displayed information.
Main Vx.xx
CPU
LED Vx.xx
driver
LED xx °C / xx °F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
xx:xx h Displays total operating time in hours and
minutes
21