Tabla de contenido
Publicidad
Open chuck jaws.
Unscrew the clamping screw using the cross screwdriver by turning the screwdriver to the right (left thread). Attach the
hexagonal key in the chuck. Hit the other end of the hexagonal key slightly. Unscrew the chuck.
The chuck is mounted in a sequence opposite to its dismantling.
6.2. Replace carbon brushes.
Worn (shorter than 5 mm), burned or broken carbon brushes on the motor should be replaced. Always replace both brushes
at the same time. Carry out the work on changing carbon brushes only to a qualified person, with original spare parts in authorized
RAIDER workshops.
6.3. All types of malfunctions must be removed in authorized RAIDER service stations.
6.4. Repairs to your power tools should only be performed by qualified specialists. This ensures the safe operation of power
tools.
7. Environmental protection.
7.1. In order to protect the environment, the power tool and packaging must be suitably processed for re-use of the raw
materials contained therein.
Do not dispose of power tools in household waste! According to the European Union Directive 2012/19 / EC on end-of-
life electrical and electronic devices and the validation and as a national law, power tools that can no longer be used must
be separately collected and subjected to appropriate processing for the recovery of the contents making them valuable raw
materials.
7.2. Rechargeable battery.
Lithium-ion battery (Li-ion).
Do not dispose of batteries in household waste or in water tanks! Do not burn them!
Batteries should be collected, recycled or disposed of in an environmentally friendly way.
According to Directive 2006/66/EC, spent rechargeable or standard batteries must be recycled.
13
Publicidad
Tabla de contenido
