First Steps; Battery Insertion - Intenso WEATHERMAN Manual Del Usuario

Brief Instruction 7" Intenso Digital Photo Frame / Weather Station
A comprehensive instruction with a description of all settings can be found on our homepage: www.intenso.de

First Steps


Connect the included power supply to the weather station. Plug the other
end into an outlet. To switch on the weather station slide the button on the
backside to the „on" Position.
Overview
Light sensor: Display adjusts to room brightness.
Display of the weather menu

Please insert the included battery into
the case. Place the outdoor sensor in
the exterior area surrounding you to
receive current weather data.
As soon as data are being received by the
outdoor sensor you will see them on the
display.

Insert a memory card (SD, MMC or MS) into the
card slot.

Battery insertion:

Please begin with screwing off the
cover on the lower side of the box
and insert the included AAA
batteries into the battery
compartment according to the
identification.
GB - 1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.

Press the [],[],[] or [] button
for the selection of a menue item and
thereafter the [ ] button to confirm
your selection.
Choose the menu item weather.

Insert a USB storage medium in the USB
Slot.
Light sensor
Infrared receiver window
On/off switch
[] Exit button (leave menu)
[M] Menu button (go to main menu)
[] Right / forward button
[] Upwards button
[ ] Play/pause and enter button
[] Left / back button
[] Downwards button
SD/MMC/MS card slot
USB Host
5V 2A DC input
Outdoor temperature sensor

Press and hold the [ ] button.
Change between a display of the
temperature in Fahrenheit or
Celsius.