TerraTec Cinergy Antenna Two Guia De Inicio Rapido página 2

EN
1
1
2
3
4
5
6
Contact TerraTec International:
http://supporten.terratec.net
Contact TerraTec UK:
0208-6027029
Monday-Friday 12am-7pm
www.terratec.com
All manuals and user guides at all-guides.com
Please check the scope of delivery first:
3
1. Antenna 'Cinergy Antenna Two'
2. Base
3. Antenna cable
4. USB adapter cable for power supply
4
+ Service request form and registration documents
2
First carry out the steps for installing your DVB-T TV card
or DVB-T receiver up to the point where the antenna is
to be connected.
Use the antenna cable provided to connect the antenna
output of the Cinergy Antenna Two to the antenna input
of your DVB-T TV card or DVB-T receiver.
Note: You may have to adjust the polarity of the antenna
(vertical or horizontal) to the emitter. How you adjust the
antenna strongly depends on the reception of your
receiving area.
If your DVB-T TV card or your DVB-T receiver does not
have a 5V phantom power supply (for details, refer to the
manual provided with the unit), the USB adapter cable
must be connected additionally to an available USB port
on your computer, laptop or Mac and to the power jack
on the antenna.
Done! You can now perform the channel scan for your
DVB-T TV card or DVB-T receiver.