AEG IMS 4440 Manual De Instrucciones página 45

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
6. Depending on the iPod/iPhone Model, firstly release
the button lock and start playing music if necessary
with the
button (6/12).
7. Follow your iPod/iPhone manual for further use of the
controls.
8. Press the
OPEN/CLOSE button to retract the dock
again.
CAUTION:
Return to radio mode before disconnecting your iPod/
iPhone from this device to avoid damages to your iPod/
iPhone.
NOTE:
If you have an incoming call when playing back music
with the iPhone docked, then playback stops and you
can hear the ring tone.
Description of iPod/iPhone Controls
(6/12)
You can pause and continue music playback. Press again
to continue playback.
(8/17)
Press 1 x =
Restart of the song from the beginning.
Press 2 x =
Skip to the previous song.
Press 3 x =
Skip to the song before the previous song,
etc. Press and hold during playback to
search in reverse through the song.
(8/7)
Press to skip to the next song and the following songs.
Press and hold during playback to search forward through
the song.
REPEAT (8 on RC)
Activates the Repeat function.
STOP (7/13)
Playback stops.
MENU (10 on RC)
Press this button to bring up the iPod/iPhone Menu or to
return to the previous menu.
ENTER (6 on RC)
Press this button to activate a function or to display the
next menu.
/ (16 on RC)
Press these buttons, to scroll up/down the iPod/iPhone
Menu.
iPod/iPhone Charging
Your iPod/iPhone battery is charged as soon as the iPod/
iPhone is docked. To do this, the unit must be connected
to the mains.
NOTE:
• Use the adapter supplied with your iPod to ensure
that your iPod/iPhone fits correctly.
• Not all iPod/iPhone generations support the charge
mode.
• The duration of the charging process depends on the
iPod/iPhone which is used and its operating condition.
AUX IN Jack (Rear)
Connect analogue playback device here. Connect playback
devices such as MP3 player, CD player, etc. to listen to the
music via the speakers.
1. Connect the external device via 3.5mm stereo jack to
the AUX IN socket.
2. Now select AUX out mode with the FUNCTION button
(4/14).
3. You will find further instructions in the manual of
your external sound source.
4. Listen to music playback from external playback
devices via the speakers. Press the VOL+/VOL- (+/-)
buttons (5/5/18) to set the volume level.
NOTE:
Set the volume of the external device to a reasonable
level.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without
detergents.
• Do not submerge the device in water.
Technical Specifications
Model: .....................................................................................IMS 4440
Backup battery: ..................................................2x 1.5V, R03, AAA
Net weight: .................................................................................2.55kg
Power Consumption: ...................................................................30W
External power adaptor
Input: ............................................................AC 100-240V, 50/60Hz
Output: .................................................................................DC 12V/2A
Polarity: ..................................................................................
Protection Class:...................................................................................II
Radio
Frequency Range: ...................................FM 87.5 ~ 108 MHz
Technical modifications reserved!
ENGLISH
45

Publicidad

Tabla de contenido
loading

Tabla de contenido