Publicidad
Idiomas disponibles
Idiomas disponibles
EN
The company thanks you for purchasing our production equipment.
It is recommended that you read the contents of this manual on the operation, installation, and
maintenance of the product.
The manual is intended to familiarize the user with the device and the principle of using the
product.
Read this manual carefully before using the product.
During the operation, carefully handle the product, do not allow mechanical damage to parts.
Keep the product clean.
HURAKAN hanging shelves for plates is designed for installation in public catering
enterprises in procurement, hot and cold shops for drying dishes.
Name
1.
Appliance certificate
2.
Cassette frame
3.
Side frame
4.
Pallet
5.
Plastic cassette
6.
Short plastic cassette
7.
SCREW M6 x16
8.
Nut M6
9.
Washer d 6
Parameter name
Overall dimensions, no more than, mm
HURAKAN hanging shelves for plates is a prefabricated structure of stainless steel AISI-430.
They consist of a frame, a cassette for plates and a pallet for collecting water
5. Preparing the product for operation. Operation procedure
Remove the packaging, assemble the product according to the assembly diagram.
Hanging shelves attached to the wall with the help of two side brackets (side frames).
The mounting bracket can be either on top or bottom of the shelf. Shelfs are recommended to
be fastened to moisture resistant surfaces. It is possible to place shelves one above the other.
Shelves have a prefabricated construction.
Maintenance and repair of the shelves is carried out by specially trained staff.
Regularly check the reliability of the shelves. The manufacturer systematically works on
improving the design of the products, examines the experience of operation with consumers
and will be grateful for suggestions aiming at improving it.
The manufacturer reserves the right to make changes in the design of the products without
reflecting them in the operation manual of this product.
FOR BUYER'S INFORMATION:
Introduction
1. Use of the product
2. Delivery set
3.Technical characteristics.
length L
width B
height H
4. The structure and the operation principle.
6. Maintenance
HKN
HKN
KWSP -
KWSP -
600/300
900/300
1
1
2
2
1
1
2
2
1
2
4
4
4
4
4
4
600±2; 900±2,5;1200±3; 1500±4
HKN
KWSP -
1200/300
1
2
1
5
-
4
4
4
Norm
300±2;
176±1.
HKN
KWSP -
1500/300
1
2
1
6
1
4
4
4
Publicidad
