Other Functions - TOPDON JUMPSURGE 1200 Manual Del Usuario

Step 2:
Connect the clamps to the vehicle battery. Red clamp to positive
polarity(+), black clamp to negative polarity(-). The Safety Indicator
will be solid green which indicates it is ready for jump starting.
Note: Please check the connection if the Safety Indicator is
abnormal or the buzzer rings.
(Red)
Step 3:
Try to start the vehicle. If it fails, disconnect the clamps from the
vehicle battery and wait about 20 seconds, then reconnect and try
again. Do not attempt more than 3 consecutive jump starts within
2 minutes.
7
(Black)
Step 4:
Remove the clamps from batteries, then separate the clamps and
jump starter after cranking the vehicle successfully. Your jump
starter will automatically power off in several seconds.
(Red)

Other Functions

This jump starter is able to be used as a power bank.
Press the Power Button once to turn on the jump starter. Then you
can quickly charge your phone or tablet through the USB Output
Port. Or use it to supply DC power (Max 16.8V/10A) to devices
through the DC Output Port.
(Black)
8