Intimus PL-200 Instrucciones De Uso página 7

GB
2 Laminating instructions
CAUTION!
Pouch jam alert! Damage to the machine!
) Follow the correct document/pouch insert direction (sealed edge first).
) Only run a lamination job within the Border marks.
) Only run a lamination job when READY light turns green.
) Only run a lamination job at the correct Slide switch setting.
Abb. 1
Set the Slide switch at the desi-
gned position, corresponding to
the pouch used.
Abb. 4
Remove finished lamination from
Pouch exit tray at the back of the
machine.
95444 2 10/19
1
6 5
When READY light turns green
and you hear the beeping sound,
the machine is ready to start la-
minating.
In case of pouch jam press the
REVERSE button and you hear the
beeping sound. Hold it with one
hand and pull out the jammed
lamination from the Pouch entry
with the other hand.
2 3
000381
4
Abb. 2
Place the pouch (proper do-
cument inside) into the pouch
entry, sealed edge first.
Abb. 5
Turning off the machine: Set the
Slide switch at the initial Off po-
sition
7
1
Pouch exit tray
2
REVERSE button
3
READY light
4
Slide switch
5
Border mark
6
Pouch entry
Abb. 3
Abb. 6
PL-200